List Of Desktop And Laptop Motherboard IC Equivalent Tested

 Hi Everyone ! 

Here We Attached List Of IC Equivalent In Pdf Format. Gdrive Link.

Thanks For The Everyone Who Spent Time On This Research. 

Google Drive Link 

https://drive.google.com/file/d/10Kty2IeqGBUQ_66SGYKII7rJMf_Ra6y3/view?usp=sharing

Happy Repairing ! 

DELL INSPIRON N5010 BIOS

Here it is Dell Bios Bin File.

Motherboard Part Number -

09909-1 DG15 MB 48.4HH01.011

Tested ! 200% Working 

Direct Link 

https://drive.google.com/file/d/10JNBb2Cx2hvUwI38zpXBYsiO-akU49_r/view?usp=sharing

ZIP Password- 123

Thanks for the support 

Happy Repairing !!

Dell N5010 Conversion Discrete To UMA

 Here I attached Dell N5010 Graphics Conversion Procedure. 

Any Doubts Feel Free To Comment.

Download Link  :

https://drive.google.com/file/d/10HA-FOToodUWc3W6E-Z0CKo86mm6ghXo/view?usp=sharing

Subscribe For More Tips.

Happy Repairing !!

LAPCARE H61 LA DEKTOP MOTHERBOARD BIOS

The Wait Is Over For LAPCARE Motherboard Bios. Here I attached LAPCARE H61 LA Working Bios, Tested By Myself. 

Subscribe My Blog For More Contents !

Happy Repairing !! 

Download Link Given Below, 

https://drive.google.com/file/d/108L3XI7ms55uPITz2lLCPKbxRCqzmkdy/view?usp=share_link

DELL MANUFACTURE MODE DEACTIVE PROCEDUE

 turning Off the Manufacturing Mode for the System Board

Your replacement system board is shipped with the manufacturing mode turned on. After the

system board is installed, you must turn off the manufacturing mode for your system to operate

correctly. If the manufacturing mode is enabled, the system may not boot correctly. In addition,

changes to BIOS and CMOS settings will not be retained, and you will not be able to flash update

the BIOS.

To turn off the manufacturing mode, perform the following steps:

1 Turn on or restart your system.

2 Press <F2> immediately after you see the following message:

<F2> = System Setup

3 From the main System Setup screen, press <Alt><F> to turn off the manufacturing mode.

4 Review the various System Setup options and change them as necessary to your preferred

system configuration.

For details on the various options, see "Using the System Setup Program" in your User’s

Guide.

5 Press <Esc> to exit the System Setup program.

Save the changes you have made and exit the program when prompted to do so.

6 As the system reboots, verify that the manufacturing mode is disabled.

If the manufacturing mode is still turned on, the following message appears at the top of the

screen:

Manufacturing Mode is Detected

If this message appears, repeat steps 1 through 5 to disable the manufacturing mode and

restore the System Setup options.

Desktop BIOS

 Bios Was Tested by our team. 100% Working Bios 

Comment Ur email id will get the access